Thrust ball bearings of the series 511
Main dimensions according to DIN 711. Thrust ball bearings of the series 511 are suitable for relatively high axial loads in one direction. They have smaller dimensions than thrust deep groove ball bearings of the series 512 with the same inner diameter and are dismountable.
The special feature of this series
Thrust ball bearings are pure thrust bearings, which means they can only withstand major axial loads. However, depending on the axial load and speed range, very small radial forces can also be transmitted.
Thrust ball bearings also include thrust deep groove ball bearings and thrust angular contact ball bearings. Thrust angular contact ball bearings can withstand lower axial load than similar thrust ball bearings but have a higher radial load capacity.
|Item no.||Inside ∅ d （mm)||Outside ∅ D (mm)||Width H (mm)||Inside Ø Housing Washer D1 （mm)||Ring Material||Rolling Element Material||Cage Material|
|51100||10||24||9||11||Chrome Steel||Chrome Steel||Sheet Steel|
|51101||12||26||9||13||Chrome Steel||Chrome Steel||Sheet Steel|
|51102||15||28||9||16||Chrome Steel||Chrome Steel||Sheet Steel|
|51103||17||30||9||18||Chrome Steel||Chrome Steel||Sheet Steel|
|51104||20||35||10||21||Chrome Steel||Chrome Steel||Sheet Steel|
|51105||25||42||11||26||Chrome Steel||Chrome Steel||Sheet Steel|
|51106||30||47||11||32||Chrome Steel||Chrome Steel||Sheet Steel|
|51107||35||52||12||37||Chrome Steel||Chrome Steel||Sheet Steel|
|51108||40||60||13||42||Chrome Steel||Chrome Steel||Sheet Steel|
|51109||45||65||14||47||Chrome Steel||Chrome Steel||Sheet Steel|
|51110||50||70||14||52||Chrome Steel||Chrome Steel||Sheet Steel|
|51111||55||78||16||57||Chrome Steel||Chrome Steel||Sheet Steel|
|51112||60||85||17||62||Chrome Steel||Chrome Steel||Sheet Steel|
|51113||65||90||18||67||Chrome Steel||Chrome Steel||Sheet Steel|
|51114||70||95||18||72||Chrome Steel||Chrome Steel||Sheet Steel|
|51115||75||100||19||77||Chrome Steel||Chrome Steel||Sheet Steel|
|51116||80||105||19||82||Chrome Steel||Chrome Steel||Sheet Steel|
|51117||85||110||19||87||Chrome Steel||Chrome Steel||Sheet Steel|
|51118||90||120||22||92||Chrome Steel||Chrome Steel||Sheet Steel|
|51120||100||135||25||102||Chrome Steel||Chrome Steel||Sheet Steel|
|51122||110||145||25||112||Chrome Steel||Chrome Steel||Sheet Steel|
|51124||120||155||25||122||Chrome Steel||Chrome Steel||Sheet Steel|
|51126||130||170||30||132||Chrome Steel||Chrome Steel||Sheet Steel|
|51128||140||180||31||142||Chrome Steel||Chrome Steel||Sheet Steel|
|51130||150||190||31||152||Chrome Steel||Chrome Steel||Sheet Steel|
|51130-M||150||190||31||152||Chrome Steel||Chrome Steel||Brass|
|51132||160||200||31||162||Chrome Steel||Chrome Steel||Sheet Steel|
|51132-M||160||200||31||162||Chrome Steel||Chrome Steel||Brass|
|51134||170||215||34||172||Chrome Steel||Chrome Steel||Sheet Steel|
|51134-M||170||215||34||172||Chrome Steel||Chrome Steel||Brass|
- Separable and interchangeable
The separable parts of TFL thrust ball bearings are interchangeable. This facilitates installation and removal, as well as maintenance and inspection.
- Initial misalignment
Bearings with spherical races can accommodate initial misalignment.
- Interference fit
The shaft ring has a round hole for an interference fit. The hole of the bearing seat washer is turned and is always larger than the hole of the shaft washer.
Available brands: INA/FAG, KOYO, NSK, SKF, NTN-SNR, IKO, NACHI, TIMKEN, different suffixes are assigned according to their characteristics. Please pay attention to the bearing comparison table (see more information). In addition, to meet the special needs of the equipment, we accept bearing customization to meet your specific needs.
Application of Thrust ball bearings of the series 511
A thrust bearing is a rotating bearing that rotates between parts to reduce friction and is designed to support axial loads (mainly used in low-speed applications). It is the axial bearing that allows rotation between the parts.
how does Thrust ball bearings of the series 511 work
As a global leader in the bearing industry, TFL provides customized solutions to lead your industry. We find a solution to get the bearings you need and shorten your long lead time. Whether it is a bearing that is modified, manufactured, or repaired according to your specifications, we can help you. Thrust shafts are often used in the following industries:
Quality and Pricing
We have our own brand “TFL” and have passed ISO9001: 2000 certification. We have the most advanced production equipment bearings, bearing testing equipment, first-class production lines, and a rigorous testing process, which directly ensures product bearing quality.
Because our range of products consists of products of neutral brands, we have the possibility to offer our customers an attractive price, more quantities for purchasing, the lower price will get.
Don’t hesitate to contact us via our contact form if you have any further questions…
Find more products in China.
You can contact us any convenient way. We are available 24/7 via fax or email.
You can also use the quick contact form below or visit our office personally. Please email us with any questions or inquires or use our contact data. We would be happy to answer your questions.