Double row deep groove ball bearing 4201 2rs tn 12x32x14 mm tfl bearing 1

Double row deep groove ball bearing 4201 2rs tn 12x32x14 mm tfl bearing 2

4200 Series Double Row Deep Groove Ball Bearings

Product benefits of TFL Bearing’s 4200 Series Ball Bearing:

double row design: significantly higher load capacity than comparable single row deep groove ball bearings; additionally, it can support tilting moments
narrower than two comparable single row deep groove ball bearings side by side
cage material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
light series with compact dimensions and low weight
suitable for very high radial loads and light axial loads in both directions
suitable for high running accuracy, quiet running, and high speeds
seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
the good fixed bearing property, but can also be used as a floating bearing, each in both directions
manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, OEM, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)

Bearing Size Chart
Product Description
Common Options

Bearing number	Bearing number	Bearing number	Bore Diameter (d)	Outer Diameter (D)	Width (B)	Cr Load Rating (N)	Cor Load Rating (N)	Weight (kg)
4200	4200-ZZ	4200-2RS	10mm	30mm	14mm	9230	5200	0.049
4201	4201-ZZ	4201-2RS	12mm	32mm	14mm	10600	6200	0.053
4202	4202-ZZ	4202-2RS	15mm	35mm	14mm	11900	7500	0.059
4302	4302-ZZ	4302-2RS	15mm	42mm	17mm	14800	9500	0.12
4203	4203-ZZ	4203-2RS	17mm	40mm	16mm	14800	9500	0.09
4303	4303-ZZ	4303-2RS	17mm	47mm	19mm	19500	13200	0.16
4204	4204-ZZ	4204-2RS	20mm	47mm	18mm	17800	12500	0.14
4304	4304-ZZ	4304-2RS	20mm	52mm	21mm	23400	16000	0.21
4205	4205-ZZ	4205-2RS	25mm	52mm	18mm	19000	14600	0.16
4305	4305-ZZ	4305-2RS	25mm	62mm	24mm	31900	22400	0.34
4206	4206-ZZ	4206-2RS	30mm	62mm	20mm	26000	20800	0.26
4306	4306-ZZ	4306-2RS	30mm	72mm	27mm	41000	30000	0.5
4207	4207-ZZ	4207-2RS	35mm	72mm	23mm	35100	28500	0.4
4307	4307-ZZ	4307-2RS	35mm	80mm	31mm	50700	38000	0.69
4208	4208-ZZ	4208-2RS	40mm	80mm	23mm	37100	32500	0.5
4308	4308-ZZ	4308-2RS	40mm	90mm	33mm	55900	45000	0.95
4209	4209-ZZ	4209-2RS	45mm	85mm	23mm	39000	36000	0.54
4309	4309-ZZ	4309-2RS	45mm	100mm	36mm	68900	56000	1.25
4210	4210-ZZ	4210-2RS	50mm	90mm	23mm	41000	40000	0.58
4310	4310-ZZ	4310-2RS	50mm	110mm	40mm	81900	69500	1.7
4211	4211-ZZ	4211-2RS	55mm	100mm	25mm	44900	44000	0.8
4311	4311-ZZ	4311-2RS	55mm	120mm	43mm	97500	83000	2.15
4212	4212-ZZ	4212-2RS	60mm	110mm	28mm	57200	55000	1.1
4312	4312-ZZ	4312-2RS	60mm	130mm	46mm	112000	98000	2.65
4213	4213-ZZ	4213-2RS	65mm	120mm	31mm	67600	67000	1.45
4313	4313-ZZ	4313-2RS	65mm	140mm	48mm	121000	106000	3.25
4214	4214-ZZ	4214-2RS	70mm	125mm	31mm	70200	73500	1.35
4314	4314-ZZ	4314-2RS	70mm	150mm	51mm	138000	125000	3.95
4215	4215-ZZ	4215-2RS	75mm	130mm	31mm	72800	80000	1.6
4315	4315-ZZ	4315-2RS	75mm	160mm	55mm	156000	143000	4.8

Special feature of this series

Main dimensions according to DIN 625-3. In comparison to single row ball bearings with the same bore- and outside diameter double row deep groove ball bearings of the 4200 series ball bearings is slightly broader, but they have a considerably higher load-carrying capacity. They have smaller dimensions than the double row deep groove ball bearings of the 4300 ball bearings series at the same inside diameter and are suitable for slightly higher speeds.

Rubber seals (RS/2RS) have the optimum sealing action with increased friction. Metal seals (Z/ZZ) are suitable for higher speeds, but they have a limited sealing action as they seal contactless. Open, seal-less bearings are suitable for extremely high speeds and – furthermore – they can be regreased more easily. However, they are more susceptible to soiling.

Manufacturers of bearings: such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)

Can be customized to meet your specific needs.

Double row design for higher load capacity. The double row deep groove ball bearing 4200-2RS-TN has a higher load capacity than comparable single row deep groove ball bearings but is only slightly wider. Main dimensions according to DIN 625-3.

Other options: Metal shield (ZZ) or rubber seal (2RS) can be provided.

Tfl bearing deep groove double row — 4200 Series -TFL

Deep Groove Ball Bearings are able to accommodate low to heavy radial loads and low to moderate thrust loads in either direction. They are available with metal shields (ZZ) or rubber seals (2RS). Several tolerance grades (Abec 1-9), internal clearance (C2 to C4) and cage designs are available to best suit the running precision and speed of the application.

Common Options: