6000-NR Series Deep Groove Ball Bearings (Slot+Snap Ring)
- High precision
- Machinery parts
- Motor bearings
- Bearing brand or OEM
Special feature of this series
Main dimensions according to DIN 625-1. Ball bearings of the extra-light 60 series NR are suitable for the form-fitting axial fitting in a bore by their slot and snap ring. They can still support moderate radial loads despite their low weight. Compared to deep groove ball bearings of the 63 medium series they require a smaller installation space at the same inside diameter, only weigh half of them and allow higher speeds furthermore.
These deep groove ball bearings are suitable for low and heavy radial loads. The 6000 series can withstand medium and low thrust loads in any loading direction.
The bearings we provide can meet almost any operating accuracy requirements and application speed: our bearings have Abec tolerances of 1-9, internal clearances from C2 to C4, and several different cage designs, including J type, W Type, RJ type, TW type and so on.
Available sizes: inner diameter 10mm to 980mm outer diameter, width 8mm to 136mm.
Special feature of this series
Main dimensions according to DIN 625-1. Ball bearings of the extra-light F-60 series are equipped with a flange for simplified locating bores in which the bearing is supposed to be axially fixed. Compared to deep groove ball bearings of the 63 medium series they require a smaller installation space at the same inside diameter, only weigh half of them and allow higher speeds.
- with slot and snap ring made of spring steel for form-fitting, axial fixing in a bore
- extra light series with compact dimensions and low weight
- suitable for high radial loads and light axial loads in both directions
- offers high running accuracy, quiet running, and high speeds
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- the good fixed bearing property, but can also be used as a floating bearing, each in both directions
Manufacturers of bearings: such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Can be customized to meet your specific needs.
Lightweight, stable, and with good spinning characteristics. The deep groove ball bearing 6000-NR-2RS is a true all-rounder and, due to its balanced properties, it is suitable for a variety of applications. With the flange, it can be fixed axially, e.g. in boreholes. Main dimensions according to DIN 625-1.
Other options: Metal shield (ZZ) or rubber seal (2RS) can be provided.
Deep Groove Ball Bearings are able to accommodate low to heavy radial loads and low to moderate thrust loads in either direction. They are available with metal shields (ZZ) or rubber seals (2RS). Several tolerance grades (Abec 1-9), internal clearance (C2 to C4) and cage designs are available to best suit the running precision and speed of the application.
Common Options:
- ZZ– Two Metal Shields
- 2RS– Two Rubber Seals
- NR– Snap Ring
- M– Brass Cage
- C0– Normal Internal Clearance
- C3– Greater than normal
| Bearing number | (d) Bore Diameter | (D) Outer Diameter | (B) Width | Seal | Internal Clearance |
|---|---|---|---|---|---|
| 6000-2RS-NR | 10 | 26 | 8 | 2RS | CN |
| 6000-ZZ-NR | 10 | 26 | 8 | ZZ | CN |
| 6001-2RS-NR | 12 | 28 | 8 | 2RS | CN |
| 6001-ZZ-NR | 12 | 28 | 8 | ZZ | CN |
| 6002-2RS-NR | 15 | 32 | 9 | 2RS | CN |
| 6002-ZZ-NR | 15 | 32 | 9 | ZZ | CN |
| 6003-2RS-NR | 17 | 35 | 10 | 2RS | CN |
| 6003-ZZ-NR | 17 | 35 | 10 | ZZ | CN |
| 6004-2RS-NR | 20 | 42 | 12 | 2RS | CN |
| 6004-ZZ-NR | 20 | 42 | 12 | ZZ | CN |
| 6005-2RS-NR | 25 | 47 | 12 | 2RS | CN |
| 6005-ZZ-NR | 25 | 47 | 12 | ZZ | CN |
| 6006-2RS-NR | 30 | 55 | 13 | 2RS | CN |
| 6006-ZZ-NR | 30 | 55 | 13 | ZZ | CN |
| 6007-2RS-NR | 35 | 62 | 14 | 2RS | CN |
| 6008-2RS-NR | 40 | 68 | 15 | 2RS | CN |
| 6008-ZZ-NR | 40 | 68 | 15 | ZZ | CN |
| 6009-2RS-NR | 45 | 75 | 16 | 2RS | CN |
| 6010-2RS-NR | 50 | 80 | 16 | 2RS | CN |
