Tfl deep groove ball bearing flanged f6700 zz f 61700 zz 10x15x4 mm. Jpg

F-6700 Series Deep Groove Ball Bearings (Flanged)

  • thin section bearing with an ultra-thin, square cross-section
  • suitable for space-saving installation in radial and axial directions
  • suitable for extremely high speeds compared to deep groove ball bearings with a larger cross-section
  • extra light series with compact dimensions and low weight
  • suitable for radial loads and light axial loads in both directions
  • offers high running accuracy, quiet running, and very high speeds
  • seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
  • the good fixed bearing property, but can also be used as a floating bearing, each in both directions
Request a quote
Bearing numberBore Diameter (d)Outer Diameter (D)Width (B)SealInternal Clear-anceRing MaterialRolling Element MaterialCage Material
F-6700-2RS10mm15mm4mm2RSCNChrome SteelChrome SteelSheet Steel
F-6700-2RS-C310mm15mm4mm2RSC3Chrome SteelChrome SteelSheet Steel
F-6700-W310mm15mm3mmopenCNChrome SteelChrome SteelSheet Steel
F-6700-W3-OIL10mm15mm3mmopenCNChrome SteelChrome SteelSheet Steel
F-6700-ZZ10mm15mm4mmZZCNChrome SteelChrome SteelSheet Steel
F-6701-2RS12mm18mm4mm2RSCNChrome SteelChrome SteelSheet Steel
F-6701-OIL12mm18mm4mmopenCNChrome SteelChrome SteelSheet Steel
F-6701-ZZ12mm18mm4mmZZCNChrome SteelChrome SteelSheet Steel
F-6702-2RS15mm21mm4mm2RSCNChrome SteelChrome SteelSheet Steel
F-6702-C3-OIL15mm21mm4mmopenC3Chrome SteelChrome SteelSheet Steel
F-6702-OIL15mm21mm4mmopenCNChrome SteelChrome SteelSheet Steel
F-6702-ZZ15mm21mm4mmZZCNChrome SteelChrome SteelSheet Steel
F-6703-2RS17mm23mm4mm2RSCNChrome SteelChrome SteelSheet Steel
F-6703-2RS-C317mm23mm4mm2RSC3Chrome SteelChrome SteelSheet Steel
F-6703-C3-DRY17mm23mm4mmopenC3Chrome SteelChrome SteelSheet Steel
F-6703-ZZ17mm23mm4mmZZCNChrome SteelChrome SteelSheet Steel
F-6703-ZZ-C317mm23mm4mmZZC3Chrome SteelChrome SteelSheet Steel
F-6704-2RS20mm27mm4mm2RSCNChrome SteelChrome SteelSheet Steel
F-6704-2RS-C320mm27mm4mm2RSC3Chrome SteelChrome SteelSheet Steel
F-6704-OIL20mm27mm4mmopenCNChrome SteelChrome SteelSheet Steel
F-6704-ZZ20mm27mm4mmZZCNChrome SteelChrome SteelSheet Steel
F-6705-2RS25mm32mm4mm2RSCNChrome SteelChrome SteelSheet Steel
F-6705-2RS-C325mm32mm4mm2RSC3Chrome SteelChrome SteelSheet Steel
F-6705-ZZ25mm32mm4mmZZCNChrome SteelChrome SteelSheet Steel
F-6705-ZZ-C325mm32mm4mmZZC3Chrome SteelChrome SteelSheet Steel
F-670630mm37mm4mmopenCNChrome SteelChrome SteelSheet Steel
F-6706-2RS30mm37mm4mm2RSCNChrome SteelChrome SteelSheet Steel
F-6706-C3-OIL30mm37mm4mmopenC3Chrome SteelChrome SteelSheet Steel
F-6706-OIL30mm37mm4mmopenCNChrome SteelChrome SteelSheet Steel
F-6706-ZZ30mm37mm4mmZZCNChrome SteelChrome SteelSheet Steel
F-6706-ZZ-C330mm37mm4mmZZC3Chrome SteelChrome SteelSheet Steel
F-6707-2RS35mm44mm5mm2RSCNChrome SteelChrome SteelSheet Steel
F-6707-2RS-C335mm44mm5mm2RSC3Chrome SteelChrome SteelSheet Steel
F-6707-C3-OIL35mm44mm5mmopenC3Chrome SteelChrome SteelSheet Steel
F-6707-ZZ35mm44mm5mmZZCNChrome SteelChrome SteelSheet Steel
F-6707-ZZ-C335mm44mm5mmZZC3Chrome SteelChrome SteelSheet Steel
F-6708-2RS40mm50mm6mm2RSCNChrome SteelChrome SteelSheet Steel
F-6708-2RS-C340mm50mm6mm2RSC3Chrome SteelChrome SteelSheet Steel
F-6708-C3-OIL40mm50mm6mmopenC3Chrome SteelChrome SteelSheet Steel
F-6708-ZZ40mm50mm6mmZZCNChrome SteelChrome SteelSheet Steel
F-6708-ZZ-C340mm50mm6mmZZC3Chrome SteelChrome SteelSheet Steel
F-6709-2RS45mm55mm6mm2RSCNChrome SteelChrome SteelSheet Steel
F-6709-2RS-C345mm55mm6mm2RSC3Chrome SteelChrome SteelSheet Steel
F-6709-C3-DRY45mm55mm6mmopenC3Chrome SteelChrome SteelSheet Steel
F-6709-ZZ45mm55mm6mmZZCNChrome SteelChrome SteelSheet Steel
F-6709-ZZ-C345mm55mm6mmZZC3Chrome SteelChrome SteelSheet Steel
F-6710-2RS50mm62mm6mm2RSCNChrome SteelChrome SteelSheet Steel

Special feature of this series

Main dimensions according to DIN 625-1. Thin section bearings of the F-67 series are equipped with a flange for simplified locating bores in which the bearing is supposed to be axially fixed. They still have smaller dimensions than thin section bearings of the 68 series with their ultrathin, square cross-section at the same inside diameter. In comparison to their inside diameter they have an extremely small outside diameter – and furthermore – they are extremely narrow. Relatively high shaft- and axis diameters can thereby be installed at an also extremely confined installation space. They are extremely light and are suitable for comparatively very high speeds.

Rubber seals (RS/2RS) have the optimum sealing action with increased friction. Metal seals (Z/ZZ) are suitable for higher speeds, but they have a limited sealing action as they seal contactless. Open, seal-less bearings are suitable for extremely high speeds and – furthermore – they can be regreased more easily. However, they are more susceptible to soiling.

Manufacturers of bearings: such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)

Can be customized to meet your specific needs.

  • Logo 23
  • Logo 20
  • Logo 19
  • Logo 18
  • Logo 17
  • Logo 11
  • Logo 4 1
  • Logo 2 1
  • Logo 1 1
  • Logo 5
  • Logo 10
  • Logo 21

Rubber seals (RS/2RS) have the optimum sealing action with increased friction. Metal seals (Z/ZZ) are suitable for higher speeds, but they have a limited sealing action as they seal contactless. Open, seal-less bearings are suitable for extremely high speeds and – furthermore – they can be regreased more easily. However, they are more susceptible to soiling.

Other options: Metal shield (ZZ) or rubber seal (2RS) can be provided.

6000 series
F-6700 Series -TFL

Deep Groove Ball Bearings are able to accommodate low to heavy radial loads and low to moderate thrust loads in either direction. They are available with metal shields (ZZ) or rubber seals (2RS). Several tolerance grades (Abec 1-9), internal clearance (C2 to C4) and cage designs are available to best suit the running precision and speed of the application.

Common Options:

  • ZZ– Two Metal Shields
  • 2RS– Two Rubber Seals
  • NR– Snap Ring
  • M– Brass Cage
  • C0– Normal Internal Clearance
  • C3– Greater than normal
Deep groove 6000a
F-6700 Series -TFL

Related Deep Groove Ball Bearings Products

Related Deep Groove Ball Bearings Articles