Cam clutch one way bearing ASNU 15 freewheel roller bearing ASNU15

Cam clutch one way bearing ASNU 15 freewheel roller bearing ASNU15

 

One way clutch bearing ASNU Description

 

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63...Ball bearing.
A typical arrangement is to install this type alongside a bearing within the same location tolerances, as shown on the following page. The inner race is keyed to the shaft.
The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission.
If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and uter race of ± S/2.

 

One way clutch bearing ASNU relative series

 

 

 

 

Model	Bore dia (mm)	Outer dia (mm)	Width (mm)	Weight (Kg)
ASNU8	8	35	13	0.07
ASNU12	12	35	13	0.06
ASNU15	15	42	18	0.11
ASNU17	17	47	19	0.15
ASNU20	20	52	21	0.19
ASNU25	25	62	24	0.38
ASNU30	30	72	27	0.54
ASNU35	35	80	31	0.74
ASNU40	40	90	33	0.92
ASNU45	45	100	36	1.31
ASNU50	50	110	40	1.74
ASNU60	60	130	46	2.77
ASNU70	70	150	51	4.16
ASNU80	80	170	58	6.09
ASNU90	90	190	64	8.2
ASNU100	100	215	73	12.6
ASNU120	120	260	86	22
ASNU150	150	320	108	42
ASNU200	200	420	138	93