BK15 + BF15 BALL SCREW END SUPPORT BEARING BLOCKS FOR SFU 2005

BK15 + BF15 BALL SCREW END SUPPORT BEARING BLOCKS FOR SFU 2005

 

Produce features:

1, Precision bearing used, has been sealed in a proper amount of lubricating grease to avoid maintenance.

2, Dyed black specification, bearing for double iron cover; Nickel specification, bearing contact type double rubber cover.

 

Installation steps: install the fixed end to the screw.
1. Do not disassemble the support seat;
2. Be careful to avoid scratches on the outer lip when placing the screw into the support seat.
3. After the fixed end of the support bracket, the nut is locked with the inner hexagon screw and the copper washer.
4. Assemble the supporting end bearing to the screw body, and put the assembled part into the supporting end shell with the elastic buckle.

 

Ball screw support Installation steps: install to the platform and base.

1, Make slide and ball screw link temporary fixed by screws, to design the fixed end of temporary fixed to the base, the fixed end moving slider makes the screw set, adjust the screw to the center of the slider move smoothly.

2, When using the fixed end of the support seat as the reference point, adjust the screw and the sliding table, or the gap between the screw and the connecting block. When using the fixed end of the support seat as the reference point, the axle height of the high-speed support seat is high. (supports are square)

3, Move the support end of the slider to the screw, adjust the center point of the screw, move to the left to the right to check whether the slide is smooth, and then fix the system on the base for a while.

 

ball screw support catalogue

 

 

size	ball screw support boundary size
	ød	T	W	W1	H	H1	P	P1	ød1	ød2	Z	ød3
BF10	8	20	60	34	39	32.5	46	15	6.3	10.8	5	5.5
BF12	10	20	60	34	43	32.5	46	18	6.3	10.8	1.5	5.5
BF15	15	20	70	40	48	38	54	18	6.3	11	6.5	5.5
BF17	17	23	86	50	64	55	68	28	8.7	14	8.6	6.6
BF20	10	26	88	52	60	50	70	22	8.7	14	8.6	6.6
BF25	25	30	106	64	80	70	85	33	10.7	17.5	11	9
BF30	30	32	128	76	89	78	102	33	13.7	20	13	11
BF35	35	32	140	88	96	79	114	35	13.7	20	13	11
BF40	40	37	160	100	110	90	130	37	17.7	26	17.5	14

ball screw components

NO.	Compoments name	qty
1	support body	1
2	bearing	1
3	C type ring	1

The bearing has been sealed in a proper amount of lubricating grease to avoid maintenance.

Dyed black specification, bearing for double iron cover; Nickel specification, bearing contact type double rubber cover.