Japan bearing NSK ball Screw bearing 40TAC90B for motor spindle

Angular contact ball bearings: 7000C-type (α = 15 °), 7000AC-type (α = 25 °) and 7000B (α = 40 °) of several types. The kinds of bearings in the outer ring lock port, the general separation of inside and outside the ring can not be combined radial and axial load and axial load in one direction. Axial load capacity of the decision by the contact angle, contact angle is greater, the ability to withstand high axial loads. This kind of bearing shaft or housing to limit axial displacement in one direction.

1)Single row and combined angular contact ball bearing

The more contact angle is, the larger axial load bearing capacity is,the smaller contact surface is,the much more convenient high speed rotary is.

Pretension is made on angular contact ball bearing to increase rididity and accuracy of bearing.

This bearing creates axial thrust load when being forced by radial load,thus it is configured(or combined) face to face or back to back.

2)Double row angular contact ball bearing

Double row angular contact ball bearing can be subinitted radial and acial louding limit speed is quite high,it is non-separated type of bearing has high rigid can be submitted doubk direetion of axial load,the bearing could apply with the four row cylindrical bearing together to limit the working roll to move in axial diretion the double row angular contact ball bearing could apply with other bearings as a position bearing.

3)Four point contact ball bearing

Standard structure is that its inner ring is equally divided in axial direction,which is applicable to axial load or

combined load,among which acial load is major composition.

Single bearing can bear double row axial load and certain extent radial load.According to different direction of

axial load,ring and sphere always contact at two points of linear.

25—the size of the inner diameter (mm)
TAC—thrust Angle contact ball bearing, the contact Angle is 60 °
62—the size of the outer diameter (mm)
B—internal style
DF—a combination
SU—free combination (single)
DU—free combination (2 column)
DB—back-to-back combination
DF—face to face combination
DT—tied for combination
DBD DFD DTD—3 columns combination
DBB DFF DBT DFT DTT—4 columns combination
C10—standard preloaded
C9—light preloaded | low torque style
PN7A—standard precision (equivalent to ISO4 class)
PN7B—inside outside diameter size difference special control precision (equivalent to ISO4 grade, SU combination special).