Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203

Bore Size:
17mm
Outside Diameter:
40mm
Model Number:
5203
Samples:
17mm , 40mm , 5203
$2.40/Piece | 1 Piece (Min. Order) |
loading...
Lead Time
If you finish the payment today, your order will ship out within the delivery date.
:
Quantity(Pieces) 1 - 1000 >1000
Est. Time(days) 3 To be negotiated
Customization:
Customized packaging(Min. Order: 1000 Pieces)
Customized logo(Min. Order: 1000 Pieces)

More

globalAlibaba.com Freight | Compare Rates | Learn more
loading...
  • Product Description
  • Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203

    Double row angular contact ball bearings can withstand larger radial loads, mainly combined radial and axial loads and moment loads, limiting the axial displacement of the shaft on both sides. The tiltability between the inner and outer rings of the double row angular contact ball bearing is mainly used to limit the bidirectional axial displacement of the shaft and the housing. The allowable tilt angle depends on the internal clearance of the bearing, bearing size, internal design and acting on it. The force and moment on the bearing, and the maximum allowable inclination angle should ensure that no excessively high additional stress is generated in the bearing. If there is an inclination angle between the inner and outer rings of the bearing, it will affect the life of the bearing, and at the same time cause the bearing's running accuracy to decrease and the running noise to increase. Double row angular contact ball bearings generally use nylon cages or brass solid cages. Pay attention to the installation of double row angular contact ball bearings. Although the bearing can withstand two-way axial loads, if there is a gap for the ball on one side, care should be taken not to allow the main axial load to pass through the gap on the side of the groove. When the bearing is used, attention should be paid to the main load on the side of the raceway without the ball notch. Paired double ball bearings If it is installed in pairs, the outer rings of a pair of bearings are opposite, that is, the wide end faces the wide end face, and the narrow end faces the narrow end face. In this way, additional axial force can be avoided, and the shaft or housing can be restricted to the axial clearance range in both directions. Because the raceways of the inner and outer rings can have relative displacement on the horizontal axis, they can bear radial load and axial load-combined load (single row angular contact ball bearings can only bear axial load in one direction, so they are usually Install in pairs). The material of the cage is brass, synthetic resin, etc., which are differentiated according to the bearing type and use conditions.
    Boundary dimensions
    (mm)
    Weight
    bearing NO.
    d
    D
    B
    0.09kg
    5203
    17
    40
    17.5
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    Shandong Tefule Bearing Co.,Ltd is a professional bearing manufacturer and dealer in china.We have been engaged in bearing industry for 10 years and made international trade of bearing import and export for more than 8 years.We have our own brand "TFL" and applied ISO9001:2000 certificate for certification authority.We attend international bearing fairs, put in many B2B website and achieve many customers all over the world also bulid up good reputation from our customers. Our company is specialized in ball bearing,roller bearing,housing units, wheel hub bearing,bearing parts and accessories, cross roller bearing.Also we can customize various large non-standard products such as the most competitive products according to customers' demands.
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203
    1. Who are we?
    We are based in Shandong, China,sell to Mid East(30.00%),South Asia(20.00%),Northern Europe(15.00%),Africa(15.00%),Southeast
    Asia(10.00%),Western Europe(10.00%),North America(10.00%).

    2. How can we guarantee quality?
    Always a pre-production sample before mass production;
    Always final Inspection before shipment;

    3.What can you buy from us?
    Ball Bearing,Roller Bearing,Wheel Bearing,Linear Bearing,Pillow Block Bearing

    4. Why should you buy from us not from other suppliers?
    Our company has gained rich experience: we know how to exactly handle every step of production.Our products possess the advantages of competitive price and good service.

    5. What services can we provide?
    Accepted Delivery Terms: FOB,CFR,CIF,EXW,Express Delivery;
    Accepted Payment Currency:USD,EUR,HKD,CNY;
    Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,Western Union,Cash,Escrow;

    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203

    Double row angular contact ball bearings can withstand larger radial loads, mainly combined radial and axial loads and moment loads, limiting the axial displacement of the shaft on both sides. The tiltability between the inner and outer rings of the double row angular contact ball bearing is mainly used to limit the bidirectional axial displacement of the shaft and the housing. The allowable tilt angle depends on the internal clearance of the bearing, bearing size, internal design and acting on it. The force and moment on the bearing, and the maximum allowable inclination angle should ensure that no excessively high additional stress is generated in the bearing. If there is an inclination angle between the inner and outer rings of the bearing, it will affect the life of the bearing, and at the same time cause the bearing's running accuracy to decrease and the running noise to increase. Double row angular contact ball bearings generally use nylon cages or brass solid cages. Pay attention to the installation of double row angular contact ball bearings. Although the bearing can withstand two-way axial loads, if there is a gap for the ball on one side, care should be taken not to allow the main axial load to pass through the gap on the side of the groove. When the bearing is used, attention should be paid to the main load on the side of the raceway without the ball notch. Paired double ball bearings If it is installed in pairs, the outer rings of a pair of bearings are opposite, that is, the wide end faces the wide end face, and the narrow end faces the narrow end face. In this way, additional axial force can be avoided, and the shaft or housing can be restricted to the axial clearance range in both directions. Because the raceways of the inner and outer rings can have relative displacement on the horizontal axis, they can bear radial load and axial load-combined load (single row angular contact ball bearings can only bear axial load in one direction, so they are usually Install in pairs). The material of the cage is brass, synthetic resin, etc., which are differentiated according to the bearing type and use conditions.

    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203

    Double row angular contact ball bearings can withstand larger radial loads, mainly combined radial and axial loads and moment loads, limiting the axial displacement of the shaft on both sides. The tiltability between the inner and outer rings of the double row angular contact ball bearing is mainly used to limit the bidirectional axial displacement of the shaft and the housing. The allowable tilt angle depends on the internal clearance of the bearing, bearing size, internal design and acting on it. The force and moment on the bearing, and the maximum allowable inclination angle should ensure that no excessively high additional stress is generated in the bearing. If there is an inclination angle between the inner and outer rings of the bearing, it will affect the life of the bearing, and at the same time cause the bearing's running accuracy to decrease and the running noise to increase. Double row angular contact ball bearings generally use nylon cages or brass solid cages. Pay attention to the installation of double row angular contact ball bearings. Although the bearing can withstand two-way axial loads, if there is a gap for the ball on one side, care should be taken not to allow the main axial load to pass through the gap on the side of the groove. When the bearing is used, attention should be paid to the main load on the side of the raceway without the ball notch. Paired double ball bearings If it is installed in pairs, the outer rings of a pair of bearings are opposite, that is, the wide end faces the wide end face, and the narrow end faces the narrow end face. In this way, additional axial force can be avoided, and the shaft or housing can be restricted to the axial clearance range in both directions. Because the raceways of the inner and outer rings can have relative displacement on the horizontal axis, they can bear radial load and axial load-combined load (single row angular contact ball bearings can only bear axial load in one direction, so they are usually Install in pairs). The material of the cage is brass, synthetic resin, etc., which are differentiated according to the bearing type and use conditions.

    Double Row Black Chamfering Radial Angular Contact Ball Bearing 5203

    Double row angular contact ball bearings can withstand larger radial loads, mainly combined radial and axial loads and moment loads, limiting the axial displacement of the shaft on both sides. The tiltability between the inner and outer rings of the double row angular contact ball bearing is mainly used to limit the bidirectional axial displacement of the shaft and the housing. The allowable tilt angle depends on the internal clearance of the bearing, bearing size, internal design and acting on it. The force and moment on the bearing, and the maximum allowable inclination angle should ensure that no excessively high additional stress is generated in the bearing. If there is an inclination angle between the inner and outer rings of the bearing, it will affect the life of the bearing, and at the same time cause the bearing's running accuracy to decrease and the running noise to increase. Double row angular contact ball bearings generally use nylon cages or brass solid cages. Pay attention to the installation of double row angular contact ball bearings. Although the bearing can withstand two-way axial loads, if there is a gap for the ball on one side, care should be taken not to allow the main axial load to pass through the gap on the side of the groove. When the bearing is used, attention should be paid to the main load on the side of the raceway without the ball notch. Paired double ball bearings If it is installed in pairs, the outer rings of a pair of bearings are opposite, that is, the wide end faces the wide end face, and the narrow end faces the narrow end face. In this way, additional axial force can be avoided, and the shaft or housing can be restricted to the axial clearance range in both directions. Because the raceways of the inner and outer rings can have relative displacement on the horizontal axis, they can bear radial load and axial load-combined load (single row angular contact ball bearings can only bear axial load in one direction, so they are usually Install in pairs). The material of the cage is brass, synthetic resin, etc., which are differentiated according to the bearing type and use conditions.

    Further Information