FYH Tapered Bore Pillow Block Mounted Ball Bearing UKP309 with Adapter Sleeve

Samples:: 40- 1000 mm
$9.10/Piece | 1 Piece (Min. Order) |
loading...

Product Description

The pillow block bearing UKP-311+H2311 is suitable for high radial loads and is particularly robust with its gray cast iron housing. The adapter sleeve required for mounting the bearing insert is included.

consisting of a ball bearing insert UK 311, a cast iron housing P 311 and an adapter sleeve H2311
suitable for mounting on flat surfaces and high radial load capacities
the housing is made of cast iron and therefore inexpensive and robust
fixing of the inner ring by concentric adapter sleeve
static misalignments can be compensated up to an angle of 2°
two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
lubricated for life; under normal operating conditions relubrication is not required
housing with integrated lubrication hole
to protect against corrosion, the housing is painted; the bearing insert and the mounting surface are treated with corrosion protection oil

Typ	Shaft -Ø in mm	Dimensions in mm	Weight (kg)
h	a	e	b	s1	s2	g	w
UKP305	20	45	175	132	45	17	20	15	85	1,7
UKP306	25	50	180	140	50	17	20	18	95	1,9
UKP307	30	56	210	160	56	17	25	20	106	2,7
UKP308	35	60	220	170	60	17	27	22	116	3,3
UKP309	40	67	245	190	67	20	30	24	129	4,6
UKP310	45	75	275	212	75	20	35	27	143	6,2
UKP311	50	80	310	236	80	20	38	30	154	7,7
UKP312	55	85	330	250	85	25	38	32	165	9,3
UKP313	60	90	340	260	90	25	38	33	176	10
UKP315	65	100	380	290	100	27	40	35	198	15
UKP316	70	106	400	300	110	27	40	40	210	19
UKP317	75	112	420	320	110	33	45	40	220	19
UKP318	80	118	430	330	110	33	45	45	235	25
UKP319	85	125	470	360	120	36	50	45	250	29
UKP320	90	140	490	380	120	36	50	50	275	35
UKP322	100	150	520	400	140	40	55	55	300	43

FYH Tapered Bore Pillow Block Mounted Ball Bearing UKP309 with Adapter Sleeve

Product Description

FYH Tapered Bore Pillow Block Mounted Ball Bearing UKP309 with Adapter Sleeve

consisting of a ball bearing insert UK 311, a cast iron housing P 311 and an adapter sleeve H2311
suitable for mounting on flat surfaces and high radial load capacities
the housing is made of cast iron and therefore inexpensive and robust
fixing of the inner ring by concentric adapter sleeve
static misalignments can be compensated up to an angle of 2°
two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
lubricated for life; under normal operating conditions relubrication is not required
housing with integrated lubrication hole
to protect against corrosion, the housing is painted; the bearing insert and the mounting surface are treated with corrosion protection oil

Typ	Shaft -Ø in mm	Dimensions in mm	Weight (kg)
h	a	e	b	s1	s2	g	w
UKP305	20	45	175	132	45	17	20	15	85	1,7
UKP306	25	50	180	140	50	17	20	18	95	1,9
UKP307	30	56	210	160	56	17	25	20	106	2,7
UKP308	35	60	220	170	60	17	27	22	116	3,3
UKP309	40	67	245	190	67	20	30	24	129	4,6
UKP310	45	75	275	212	75	20	35	27	143	6,2
UKP311	50	80	310	236	80	20	38	30	154	7,7
UKP312	55	85	330	250	85	25	38	32	165	9,3
UKP313	60	90	340	260	90	25	38	33	176	10
UKP315	65	100	380	290	100	27	40	35	198	15
UKP316	70	106	400	300	110	27	40	40	210	19
UKP317	75	112	420	320	110	33	45	40	220	19
UKP318	80	118	430	330	110	33	45	45	235	25
UKP319	85	125	470	360	120	36	50	45	250	29
UKP320	90	140	490	380	120	36	50	50	275	35
UKP322	100	150	520	400	140	40	55	55	300	43