GE35KRRB Radial insert ball bearing 35x72x19mm
- Samples:
- 35mm$2.00/Piece | 1 Piece (Min. Order) |
- Customization:
- Customized logo(Min. Order: 1 Pieces)Customized packaging(Min. Order: 1 Pieces)
More
Pillow block bearing
Although its basic performance should be similar to that of deep groove ball bearings, because most of these bearings are used in rougher machinery, the installation and positioning are not accurate enough, the axis of the shaft and the seat hole are poorly aligned, or the shaft is long and deflection In the case of large-scale bearings, the accuracy of the bearing itself is not high enough, and some structures are relatively rough, so the actual performance of the deep groove ball bearing of the same specification will be discounted. For example: The outer spherical ball bearing with top wire is used in the through shaft with large rigidity difference and large deflection. This kind of bearing has seal rings on both sides to prevent the intrusion of dirt. The appropriate amount of lubricant has been filled at the factory and does not need to be cleaned before installation. , No need to add lubricant, when the jack screw on the protruding end of the bearing inner ring is tightened on the shaft. The allowable axial load shall not exceed 20% of the rated dynamic load. The performance of the outer spherical ball bearing with eccentric sleeve and the outer spherical bearing with top wire are basically the same, except that the top wire is not on the inner ring, but on the eccentric sleeve. The inner hole of the tapered outer spherical ball bearing is a tapered hole with a taper of 1:12, which can be directly installed on a tapered shaft or on a shoulderless optical shaft with the aid of a tightening bushing, and the bearing clearance can be fine-tuned. Outer spherical bearings are preferentially suitable for occasions that require simple equipment and parts, such as agricultural machinery, transportation systems or construction machinery. It is mainly used to bear the combined radial and axial load based on the radial load. Generally, it is not suitable to bear the axial load alone. This type of bearing can be installed with an inner ring (with a full set of rollers and retainers) and an outer ring separately. This kind of bearing does not allow the shaft to be inclined relative to the housing, and additional axial force will be generated under the radial load. The size of the axial clearance of this kind of bearing has a great influence on whether the bearing can work normally. When the axial clearance is too small, the temperature rise is higher; when the axial clearance is large, the bearing is easy to be damaged. Therefore, pay special attention to adjusting the axial clearance of the bearing during installation and operation, and pre-interference installation can be used if necessary to increase the rigidity of the bearing.
d | 35mm |
D | 72mm |
B | 37.7mm |
C | 19mm |
P | 21.74mm |
O | 60.55mm |
Weight | 0.23kg |
Shandong Tefule Bearing Co.,Ltd is a professional bearing manufacturer and dealer in china.We have been engaged in bearing industry for 10 years and made international trade of bearing import and export for more than 8 years.We have our own brand "TFL" and applied ISO9001:2000 certificate for certification authority.We attend international bearing fairs, put in many B2B website and achieve many customers all over the world also bulid up good reputation from our customers. Our company is specialized in ball bearing,roller bearing,housing units, wheel hub bearing,bearing parts and accessories, cross roller bearing.Also we can customize various large non-standard products such as the most competitive products according to customers' demands.
1. Who are we?
We are based in Shandong, China,sell to Mid East(30.00%),South Asia(20.00%),Northern Europe(15.00%),Africa(15.00%),Southeast
Asia(10.00%),Western Europe(10.00%),North America(10.00%).
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
Ball Bearing,Roller Bearing,Wheel Bearing,Linear Bearing,Pillow Block Bearing
4. Why should you buy from us not from other suppliers?
Our company has gained rich experience: we know how to exactly handle every step of production.Our products possess the advantages of competitive price and good service.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,Express Delivery；
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,Western Union,Cash,Escrow;
We are based in Shandong, China,sell to Mid East(30.00%),South Asia(20.00%),Northern Europe(15.00%),Africa(15.00%),Southeast
Asia(10.00%),Western Europe(10.00%),North America(10.00%).
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
Ball Bearing,Roller Bearing,Wheel Bearing,Linear Bearing,Pillow Block Bearing
4. Why should you buy from us not from other suppliers?
Our company has gained rich experience: we know how to exactly handle every step of production.Our products possess the advantages of competitive price and good service.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,Express Delivery；
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,Western Union,Cash,Escrow;
Pillow block bearing
Although its basic performance should be similar to that of deep groove ball bearings, because most of these bearings are used in rougher machinery, the installation and positioning are not accurate enough, the axis of the shaft and the seat hole are poorly aligned, or the shaft is long and deflection In the case of large-scale bearings, the accuracy of the bearing itself is not high enough, and some structures are relatively rough, so the actual performance of the deep groove ball bearing of the same specification will be discounted. For example: The outer spherical ball bearing with top wire is used in the through shaft with large rigidity difference and large deflection. This kind of bearing has seal rings on both sides to prevent the intrusion of dirt. The appropriate amount of lubricant has been filled at the factory and does not need to be cleaned before installation. , No need to add lubricant, when the jack screw on the protruding end of the bearing inner ring is tightened on the shaft. The allowable axial load shall not exceed 20% of the rated dynamic load. The performance of the outer spherical ball bearing with eccentric sleeve and the outer spherical bearing with top wire are basically the same, except that the top wire is not on the inner ring, but on the eccentric sleeve. The inner hole of the tapered outer spherical ball bearing is a tapered hole with a taper of 1:12, which can be directly installed on a tapered shaft or on a shoulderless optical shaft with the aid of a tightening bushing, and the bearing clearance can be fine-tuned. Outer spherical bearings are preferentially suitable for occasions that require simple equipment and parts, such as agricultural machinery, transportation systems or construction machinery. It is mainly used to bear the combined radial and axial load based on the radial load. Generally, it is not suitable to bear the axial load alone. This type of bearing can be installed with an inner ring (with a full set of rollers and retainers) and an outer ring separately. This kind of bearing does not allow the shaft to be inclined relative to the housing, and additional axial force will be generated under the radial load. The size of the axial clearance of this kind of bearing has a great influence on whether the bearing can work normally. When the axial clearance is too small, the temperature rise is higher; when the axial clearance is large, the bearing is easy to be damaged. Therefore, pay special attention to adjusting the axial clearance of the bearing during installation and operation, and pre-interference installation can be used if necessary to increase the rigidity of the bearing.
