High speed excavator inch size bearing 628-2Z heavy duty bearing

 Detail of 628-2Z excavator deep groove bearings

Introduction of excavator bearing

1:An excavator bearing comprising: excavator bearings, slewing bearings, needle roller bearings excavators, excavators gearbox bearings, motor bearings excavator, excavator driver bearings, spherical plain bearings excavators, excavator slewing bearings and used excavators top British non-standard bearings. 
2:excavator bearing installation: 
(1) The shift means improperly adjusted, if this type of excavator uses a mechanical transmission shift human way, if the shift lever, and the vertical axis, horizontal axis and vertical screw loose can cause the transmission to “jump stop.” Derailer wear 
(2) External sudden load changes due to the nature of work and the machine excavator design their own reasons, sudden changes in the external load will lead to its transmission “jump stop.” When the road surface uneven, excavator for downhill driving or improper driving route when leaving the outside world sudden load changes, sudden change in load through the wheel, drive shaft in the transmission gear meshing gear, so the gear meshing gear due to produce axial thrust and disengaged, causing the transmission to “jump stop.” Decline in performance self-locking mechanism 
(3) the transmission shifter excavator sets of teeth is to rely on a sliding sleeve in the axial movement of fixed gear and meshed with the gear shift is driven gear to achieve. In the frequent shifting process, the end face of each of the gear teeth are susceptible to ground into a cone, resulting in reducing its engaging performance and lead to “jump stop.” 
(4) To prevent transmission “jump stop”, excavators in the transmission II,III gear and IV,Vshift fork shaft hole cover side and I reverse gear are safe within the forks have played the role of self-locking ball and spring. When positioning the self-locking effect since its elastic spring weakened or broken, the self-locking performance self-locking mechanism will decline until it disappears, causing the transmission to “jump stop.” At the same time, positioning the ball or fork shaft groove if worn, can also result in transmission “jump stop.” 
(5) improper operation excavator traveling on the ramp (especially downhill running), if the improper operation will cause the transmission to “jump stop.”

Other types of 618/8 series excavator deep groove bearings

06000-00213 BEARING

06000-00308 BEARING

06000-00312 BEARING

06000-00313 BEARING

06000-00907 BEARING

06000-01021 BEARING

06000-01210 BEARING

06000-01211 BEARING

06000-02209 BEARING

06000-02222 BEARING

06000-02306 BEARING

06000-02311 BEARING

06000-02314 BEARING

06000-03211 BEARING

06000-03215 BEARING

06000-03305 BEARING

06000-05206 BEARING

06000-05207 BEARING

06000-05211 BEARING

06000-05306 BEARING

06000-05307 BEARING

06000-05309 BEARING

06000-05310 BEARING

06000-06001 BEARING

06000-06004 BEARING

06000-06005 BEARING

06000-06006 BEARING

06000-06007 BEARING

06000-06011 BEARING

06000-06013 BEARING

06000-06017 BEARING

06000-06018 BEARING

06000-06200 BEARING

06000-06201 BEARING

06000-06202 BEARING

06000-06203 BEARING

06000-06211 BEARING

06000-06212 BEARING

06000-06213 BEARING

06000-06216 BEARING

06000-06218 BEARING

06000-06219 BEARING

06000-06221 BEARING

06000-06222 BEARING

06000-06224 BEARING

06000-06303 BEARING

06000-06304 BEARING

06000-06306 BEARING

06000-06309 BEARING

06000-06310 BEARING

06000-06311 BEARING

06000-06312 BEARING

06000-06315 BEARING

06000-06318 BEARING

06000-06322 BEARING

06000-06406 BEARING

06000-06407 BEARING

06000-06410 BEARING

06000-06411 BEARING

06000-06414 BEARING

06000-06905 BEARING

06000-06908 BEARING

06000-06909 BEARING

06000-06910 BEARING

06000-06917 BEARING

06000-06918 BEARING

06000-06921 BEARING

06000-06926 BEARING

06000-07215 BEARING

06000-07217 BEARING

06000-21308 BEARING

06000-21310 BEARING

06000-21311 BEARING

06000-21318 BEARING

06000-22210 BEARING

06000-22211 BEARING

06000-22213 BEARING

06000-22218 BEARING

06000-22219 BEARING

06000-22220 BEARING

06000-22222 BEARING

06000-22224 BEARING

06000-22309 BEARING

06000-22310 BEARING

06000-22311 BEARING

06000-22312 BEARING

06000-22313 BEARING

Pictures of excavators spherical roller bearings

1. For small ones:anti-rust oil+vacuum plastic bag+paper box+wooden box 

2. For big ones:anti-rust oil+waterproof belt+professional belt+wooden box

Payment Terms:

L/C ,T/T ,western Union

1. 30% deposit By T/T, Western Union, Paypal, 70% before delivery.

2. 100% L/C at sight 

Other information:

Production Lead time: 7~25days; If we have this item in stock , 2days delivery. 

Delivery Date: within 3-5days after your payment.

Sample: Free, but we don’t bear the freight of sample

MOQ: 1 set Supply Ablility:100000 pcs/Month